200 Bucks Shipped from Mad Hatter Exhaust....





AirAid modular intake tube, K&N filter, Magnaflow Exhaust, Line-X'd bed and fender wells, 2.5 Inch AS Level Kit and 3 inch AS Rear Block, 1 Mile range Viper 5900 SST remote start and alarm system, JL Audio Stealthbox, JL Audio 500/1, JL Audio 300/4, Alpine Type-R 6.5 inch components in front doors, Alpine Type-R 5x7's in rear doors, Alpine Iva-w505, LOTS of Dynamat, 15% Tinted windows, Billet Grills in factory H-bar and lower bumper.

 

not bad! cant wait to hear some vids

 

sweet!

 

Those look like crush bends

 

ohh gosh they sure do not good

 

The crush bend will be fine especially after dual exiting muffler...

 

The ones in the picture are.
I payed 20 bucks extra for mandrel bent exhaust pipes!

 

Alright cool, I was worried there for a second Good call man.

 

$200, pretty good deal. Are you going to take it somewhere to get welded up or is it held together by clamps?

 

Going to install it with a buddy tonight using clamps for now and see how it holds up...

If it looks like I should have it welded then I'll take it to a shop...

Part of the reason I bought this kit was so I could do the work myself!!

It came yesterday everything is there and in good shape.
So we'll see how it goes tonight!!

I'm just hoping that I made the right choice going with the 12258
18x5x8 Magnaflow... I didn't want it to Loud but I do want to hear it...

 

It should be a pretty straight through exhaust install, should not run into any problems and have a good easy time. The only PITA should be getting the OEM muffler out from the one clamp up in front.

The muffler you have will be perfect.

 

Awesome!!

Any tricks I should know as to getting the factory muffler out of that clamp?



AirAid modular intake tube, K&N filter, Magnaflow Exhaust, Line-X'd bed and fender wells, 2.5 Inch AS Level Kit and 3 inch AS Rear Block, 1 Mile range Viper 5900 SST remote start and alarm system, JL Audio Stealthbox, JL Audio 500/1, JL Audio 300/4, Alpine Type-R 6.5 inch components in front doors, Alpine Type-R 5x7's in rear doors, Alpine Iva-w505, LOTS of Dynamat, 15% Tinted windows, Billet Grills in factory H-bar and lower bumper.

 

Use Thrush lubricant or WD-40, let it sit 30mins - 1 hour or so prior to doing the work, time and patience it will come out. If all else fails, sawzall that b***h out

Dont forget to spray the rubber hangers.

 

I'll run with plan A...

And like you say if that fails...

Plan B could be FUN

What gear Head dosen't like to play with Power Tools... R..R..R..



AirAid modular intake tube, K&N filter, Magnaflow Exhaust, Line-X'd bed and fender wells, 2.5 Inch AS Level Kit and 3 inch AS Rear Block, 1 Mile range Viper 5900 SST remote start and alarm system, JL Audio Stealthbox, JL Audio 500/1, JL Audio 300/4, Alpine Type-R 6.5 inch components in front doors, Alpine Type-R 5x7's in rear doors, Alpine Iva-w505, LOTS of Dynamat, 15% Tinted windows, Billet Grills in factory H-bar and lower bumper.