Exhaust & Intake Systems
Sponsored by:
Sponsored by: Real Truck

Help!! Took cats out... now what??

Thread Tools
 
Search this Thread
 
Old Aug 1, 2008 | 12:16 AM
  #16  
v8isgr8's Avatar
Thread Starter
|
Junior Member
Joined: Dec 2007
Posts: 24
Likes: 0
From: BEZANSON ALBERTA!
new manifolds with 2.75" piping from manifolds down to just befor the rear o2 sensors an then factory till 2 feet b4 the muffler an then 3" all the way back from there.. an that dynomax in there too.. hiflow cats off ebay???
 

Last edited by v8isgr8; Aug 1, 2008 at 12:19 AM.
Reply
Old Aug 1, 2008 | 12:28 AM
  #17  
joshmac4.6's Avatar
Senior Member
Joined: Feb 2008
Posts: 1,733
Likes: 0
From: Western NC
That would be the route I would go then.
 
Reply
Old Aug 1, 2008 | 12:37 AM
  #18  
v8isgr8's Avatar
Thread Starter
|
Junior Member
Joined: Dec 2007
Posts: 24
Likes: 0
From: BEZANSON ALBERTA!
what? put two of those ones of ebay in where the old cats were??
 
Reply
Old Aug 1, 2008 | 12:41 AM
  #19  
joshmac4.6's Avatar
Senior Member
Joined: Feb 2008
Posts: 1,733
Likes: 0
From: Western NC
Thats what I would do.
 
Reply
Old Aug 1, 2008 | 12:48 AM
  #20  
v8isgr8's Avatar
Thread Starter
|
Junior Member
Joined: Dec 2007
Posts: 24
Likes: 0
From: BEZANSON ALBERTA!
ok. well thank u so much for all your advice!
keep the rubber side down!
 
Reply
Old Aug 1, 2008 | 12:49 AM
  #21  
joshmac4.6's Avatar
Senior Member
Joined: Feb 2008
Posts: 1,733
Likes: 0
From: Western NC
And between the ditches
 
Reply
Old Aug 1, 2008 | 12:53 AM
  #22  
v8isgr8's Avatar
Thread Starter
|
Junior Member
Joined: Dec 2007
Posts: 24
Likes: 0
From: BEZANSON ALBERTA!
Got it fixed today.. resonator with a straight through muffler..not sure what brand but it sounds pretty mean
 

Last edited by v8isgr8; Aug 1, 2008 at 11:47 PM.
Reply




All times are GMT -4. The time now is 02:54 PM.