Pioneer 5400T
Pioneer 5400T
Pioneer 5400T - $85
* Peak Music Power: 760 Watts
* Number of Channels: 2
* Load Impedance Capability: 2~8 Ohm (Stereo), 4~8 Ohm (Bridged)
* Continuous Power (4 ohm): 125W x 2
* Continuous Power (2 ohm): 190W x 2
* Continuous Power Bridged (4 ohm): 380W x 1
* Frequency Response :10Hz ~ 50kHz
* Total Harmonic Distortion: <0.03%
* Signal-to-Noise Ratio: >95dB
* Dimensions: 10-1/2"x2-1/2"x 13-5/8"
* Bridgeable
* Channel # Capability: 2/1
* PWM Regulated MOSFET Power Supply
* Balanced Isolator Input Circuit
* RCA Inputs: 2 Channel
* Speaker Level Input: 2 Channel
* Input Level Control: Hi-Volt (400mV ~ 6.5v)
* Built-in Crossover: Selectable LPF
* Crossover Frequency Range: 80Hz, -12dB/Oct.
* Bass Level Control: 50Hz, 0/6/9/12dB
* Output Power (4 Ohm, <=1% THD): 125 Watts x 2
* Output Power (4 Ohm Bridged, <=1% THD): 380 Watts x 1
* Output Power (2 Ohm, <=1% THD): 190 Watts x 2
* Signal to Noise (1 Watt into 4 Ohms): 75 dBA
* Dynamic Power (4 Ohm): 130


* Peak Music Power: 760 Watts
* Number of Channels: 2
* Load Impedance Capability: 2~8 Ohm (Stereo), 4~8 Ohm (Bridged)
* Continuous Power (4 ohm): 125W x 2
* Continuous Power (2 ohm): 190W x 2
* Continuous Power Bridged (4 ohm): 380W x 1
* Frequency Response :10Hz ~ 50kHz
* Total Harmonic Distortion: <0.03%
* Signal-to-Noise Ratio: >95dB
* Dimensions: 10-1/2"x2-1/2"x 13-5/8"
* Bridgeable
* Channel # Capability: 2/1
* PWM Regulated MOSFET Power Supply
* Balanced Isolator Input Circuit
* RCA Inputs: 2 Channel
* Speaker Level Input: 2 Channel
* Input Level Control: Hi-Volt (400mV ~ 6.5v)
* Built-in Crossover: Selectable LPF
* Crossover Frequency Range: 80Hz, -12dB/Oct.
* Bass Level Control: 50Hz, 0/6/9/12dB
* Output Power (4 Ohm, <=1% THD): 125 Watts x 2
* Output Power (4 Ohm Bridged, <=1% THD): 380 Watts x 1
* Output Power (2 Ohm, <=1% THD): 190 Watts x 2
* Signal to Noise (1 Watt into 4 Ohms): 75 dBA
* Dynamic Power (4 Ohm): 130


Actually to be honest it never made it to the hook up stage. I was going to power a 10" sub I had. I like to do things right, and I just didn't/don't have the time or money to completely soundmat my truck and purchase all the equipment needed. This amp was a purchase I had made previously, so I decided to go ahead and sell it to get it out of my closet.


