2009 Platinum DRL

Old Jul 6, 2018 | 02:39 PM
  #1  
Sabre100's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2018
Posts: 2
Likes: 0
From: Renton, Washington
2009 Platinum DRL

I have a Canadian spec truck with DRL's. The l/h drl has quit working and I am trying to find the relays and resistor that control them. I have looked at every location pointed out on the web and cannot find them. The owners manual does not list anything for the DRL's or the lowbeams other than the fuses in the fuse block inside the truck. I have checked these and they are ok.

Thanks
 
Reply
Old Jul 8, 2018 | 05:17 PM
  #2  
joe51's Avatar
Senior Member
Joined: Oct 2011
Posts: 876
Likes: 14
IIRC the resistor is under the cover in the top center of the dash. I'm not sure about the relay. There was a thread on here years ago about how to add the resister to American trucks in order to add the drl feature like the Canadian trucks have.
 
Reply
Old Jul 8, 2018 | 06:37 PM
  #3  
Sabre100's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2018
Posts: 2
Likes: 0
From: Renton, Washington
Thanks Joe,

Normally, (from what I've seen on the web) there is a cover you can remove if the relay is under the dash cap, but mine is one complete piece all the way across. That doesn't mean it isn't there of course. That would be my luck. haha

Tom (Sabre)
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 05:46 AM.