Best place to tap 12v accessory switched on 2012 Screw

Thread Tools
 
Search this Thread
 
  #1  
Old 03-30-2012, 10:05 AM
SeaRayder's Avatar
Member
Thread Starter
Join Date: Jan 2012
Posts: 63
Likes: 0
Received 0 Likes on 0 Posts
Best place to tap 12v accessory switched on 2012 Screw

I'm currently permanently installing a radar detector permanently in my 2012 Screw. What is the best place to tap a 12v switched source and ground? The fusebox was my first choice but I cant find a bolt to ground to there and the fuses are TINY! I would prefer not to splice a wire, Any Ideas?

-SeaRayder
 
  #2  
Old 03-30-2012, 10:14 AM
SSCULLY's Avatar
Technical Article Contributor

Join Date: Jun 2002
Location: Under the flightpath of old ORD 22R
Posts: 10,511
Likes: 0
Received 7 Likes on 7 Posts
ATM add a fuse



For the ground, did you check behind the door trim panel.

On the '06 My, you had to pull back on the door trim to find the ground lug, it was not hanging in the open next to the fuse panel.

 



Quick Reply: Best place to tap 12v accessory switched on 2012 Screw



All times are GMT -4. The time now is 05:07 PM.