Trouble codes
Global Moderator &
Senior Member
Senior Member
Joined: Aug 2007
Posts: 7,890
Likes: 61
From: Among javelinas and scorpions in Zoniestan
No idea at all. The lists I know about have 4-digit codes starting with P, B, C, and U. Nothing beginning with D or E and nothing without a starting letter.
- Jack
- Jack
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
Are those from the DTM on the Instrument cluster ?
If so, those are hex displayed 16 bit codes.
Part of them can be from items like no oil pressure ( usually the DTM is run position with the engine off ), or other similar when the key is in the run position, but the engine is not running ( truck expects the engine to be running in this position ).
Do you have a CEL icon illuminated on the cluster ?
If so, get a code reader, as the hex code id kind of hard to convert to a 16 bit and figure out what the actual DTC is.
If so, those are hex displayed 16 bit codes.
Part of them can be from items like no oil pressure ( usually the DTM is run position with the engine off ), or other similar when the key is in the run position, but the engine is not running ( truck expects the engine to be running in this position ).
Do you have a CEL icon illuminated on the cluster ?
If so, get a code reader, as the hex code id kind of hard to convert to a 16 bit and figure out what the actual DTC is.
