installing a tachometer on the 2004-2008 style f150
Thread Starter
|
Member
Joined: Jan 2009
Posts: 16
Likes: 0
From: New Brunswick Canada
installing a tachometer on the 2004-2008 style f150
i havent seen anything on installing a tac. on the 04-08 body style f150s and was wondering who out there has done it and what u did?? can u just get a tac. signal from one of the wires going to one of your coils?? any help would be nice, thanxs
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
Which model tach are you looking at ?
The Autometer ones have a tach adapter that is installed. I think this uses the CPS as the input, but I am drawing a blank at the moment.
This is for the typical 2 1/16" type tachs, the other type are ODB-II installed, and actually read the RPM from the engine ( over the comm network in the truck ).
The Autometer ones have a tach adapter that is installed. I think this uses the CPS as the input, but I am drawing a blank at the moment.
This is for the typical 2 1/16" type tachs, the other type are ODB-II installed, and actually read the RPM from the engine ( over the comm network in the truck ).
