I need to lower my lights now that i have put the leveling kit on my truck.. I tried to turn counter clockwise one full-rotation but still bliding.. Do i need to turn several times and what tool is best for the job? Vice scripts are so so harsh>>>>

 

I think Auto Zone has the tool for adjusting the headlights on newer Fords. If you pop the headlights out, you can use a 5/32 socket on a 1/4 inch drive ratchet. If not, you will need an extended box-end ratchet/wrench. 4mm will work too.

Mike

 

Headed to parts store tonight>>>

 

how'd it go?

 

The guy at the store sold me the wrench for the older ford models. So i need to go back just haven't yet.. But the next problem is when i do get the wright tool how down do i adjust them... I wonder if theirs some formula.. Like 25 ft the light bar should be about 4 ft off the ground .. you know something like that. ???

 

ok if I get this right from memory it will be funny... lisle 43230

 

ahh dang, so close.... http://cgi.ebay.com/Lisle-Headlight-...em300048950555
Lisle 14540

 

Thats funny you were close :santa: