Ordered my Xcal2 and 3.25" AF1 :-)
Former Sponsor
Joined: Mar 1998
Posts: 13,385
Likes: 4
From: Virginia
Hi Brian,
No, you do NOT want to run the 3.25" or 3.5" AF1 intakes on a stock factory tune, as the engine will go lean, especially at heavier throttle. Now if you already have our baseline tuning that includes the basic "correction" for the 3.25" unit, then yes, you can go ahead and run it - so it all depends on what tuning you have right now.
If you are waiting on us for tuning for a 3.25" unit give us a quick call and we'll see exactly where you are at so you'll know when to expect it, OK?
Thanks!
No, you do NOT want to run the 3.25" or 3.5" AF1 intakes on a stock factory tune, as the engine will go lean, especially at heavier throttle. Now if you already have our baseline tuning that includes the basic "correction" for the 3.25" unit, then yes, you can go ahead and run it - so it all depends on what tuning you have right now.
If you are waiting on us for tuning for a 3.25" unit give us a quick call and we'll see exactly where you are at so you'll know when to expect it, OK?
Thanks!
Senior Member
Joined: Oct 2001
Posts: 1,216
Likes: 0
From: Houston, Tx
Originally Posted by Superchips_Distributor
Hi Brian,
No, you do NOT want to run the 3.25" or 3.5" AF1 intakes on a stock factory tune, as the engine will go lean, especially at heavier throttle. Now if you already have our baseline tuning that includes the basic "correction" for the 3.25" unit, then yes, you can go ahead and run it - so it all depends on what tuning you have right now.
If you are waiting on us for tuning for a 3.25" unit give us a quick call and we'll see exactly where you are at so you'll know when to expect it, OK?
Thanks!
No, you do NOT want to run the 3.25" or 3.5" AF1 intakes on a stock factory tune, as the engine will go lean, especially at heavier throttle. Now if you already have our baseline tuning that includes the basic "correction" for the 3.25" unit, then yes, you can go ahead and run it - so it all depends on what tuning you have right now.
If you are waiting on us for tuning for a 3.25" unit give us a quick call and we'll see exactly where you are at so you'll know when to expect it, OK?
Thanks!
Thanks for the reply Mike, I actually just replied in a different thread about this. I think I may have gotten the 3.5 tube and wanted to make sure my tunes were setup for that. I will give you guys/gals a call. Thanks
-Brian