Show me your toolbox!
Senior Member
Joined: Oct 2006
Posts: 442
Likes: 2
From: Calvert Co., MD
I have one too, and I also have the same issue as you, where the passenger side of the box doesn't seem to fully close. It locks shut, but it doesn't close square to the box.
Poor engineering on a simple box/lid isn't a great product imo.
But the price was right, so I guess we got what we paid for.
I don't have the slim like yours, but it shuts just as crooked. lol
Poor engineering on a simple box/lid isn't a great product imo.
But the price was right, so I guess we got what we paid for.
I don't have the slim like yours, but it shuts just as crooked. lol
Senior Member
Joined: Jan 2008
Posts: 288
Likes: 0
From: Toronto
^I never bothered to look if there was anything adjustable. It shut just fine at first, then when it went out of whack, I figured the mounting point of the catch bent since the diamond plate is so thin.
Thanks for the tip.
I'll take a look and see if I can adjust it.
Thanks for the tip.
I'll take a look and see if I can adjust it.
Here is mine.
Weather Guard Chest.
I set it up on 3" Box steel so it would sit flush with the bed rails.
From the Side
Sorry the picture quality is bad, and that I didn't clear off the snow. But its too dang cold to be outside too much!
Weather Guard Chest.
I set it up on 3" Box steel so it would sit flush with the bed rails.
From the Side
Sorry the picture quality is bad, and that I didn't clear off the snow. But its too dang cold to be outside too much!
Member
Joined: Jan 2010
Posts: 71
Likes: 0
From: South Jersey
Here is an old thread of mine from last year. Short Bed with low profile and cover.
https://www.f150online.com/forums/be...ofile-box.html
https://www.f150online.com/forums/be...ofile-box.html
