DIY Harley Davidson Edition Taillamps 04 - 08 F150
#78
Just how they looked in the shade. No I bought this set. They were paint shop cleared.
#79
[QUOTE=DarrenWS6;4588978]Might be screwed, if your meaning the lens warp drooped downward and didn't flex. You need to be quick to remove, and need to keep the oven at 200 degrees and check on the light every minute, 5 - 10 min is sufficient enough.
Yea the did droop some.. inwards. I'll try and post up pics later. I removed as fast as possible was so much easier than headlights.
I still put them back on the truck even tho they warped atleast for now til I am capable to get new ones. Luckily my leds still fit with some pressure of course.
Yea the did droop some.. inwards. I'll try and post up pics later. I removed as fast as possible was so much easier than headlights.
I still put them back on the truck even tho they warped atleast for now til I am capable to get new ones. Luckily my leds still fit with some pressure of course.
#82
#84
Yes. A guy with a navy blue FX4 did it and succeeded. I tried it with the oven and broke it trying to pull it apart.
Here is the thread.
https://www.f150online.com/forums/ap...ht-inside.html
Here is the thread.
https://www.f150online.com/forums/ap...ht-inside.html
Last edited by DarrenWS6; 01-02-2012 at 04:51 PM.
#87
Quoted for truth.. my first taillight worked without any problem and the second one as i was prying i broke off 3 corners...guess im gonna have to glue the pieces back on until i can get a new taillight and try again