Overhead Console Temp Display Repair
#181
#182
i found one on eBay last summer, but with Patman's great instructions I was able to re solder mine and it has worked great here in the Ft. Worth weather ever since!!! Otherwise, yes, probably a salvage yard...knowing the same fate might have occurred to what you would find there, as well.
#183
#187
Easiest would be to measure another of the 911 labeled resistors and the board with an ohm meter and go from there.
#188
IIRC: Pretty much any 500 ohm resistor will do. There was several people in this thread that posted results of replacement resistors