Looking to put some nerf bars on my truck. I've looked on Craigslist and found some reasonably priced bars, but only listed for Chevy or Dodge, has anyone had any luck with fitting mounts or should I just make brackets and drill new holes?

 

new one's on ebay, shipped $108 (04 F150 STX) I did have to cut a bracket drivers side to go around brake cable in the floor.

 

check these out before you buy used. 3" are strong.
http://www.ebay.com/sch/i.html?_from...20bars&_fscr=1

 

flat type, more like stock.
http://www.ebay.com/bhp/f150-supercrew-nerf-bars

 

Thank ya sir, those will work and price is good.

 

This! They are sure tough and sturdy.

 

These 3" tubes on my truck are so strong, 350 lbs standing on them and they don't move!

 

Forgot to add, These mount to the inside of the frame, not the body! Brackets are HD steel w/ 1/2 inch bolts, speed clips in to OEM holes. I would email the saler and ask if the ones you want mount to the inner frame of the truck. Body mounted ones are weak!

 

Why get used nerf bars if there are inexpensive ones like the Westin and Lund. Best of all, you can be sure of the fitment if you buy a brandnew set.