Aftermarket audio / nav and sync?
Member
Joined: Feb 2010
Posts: 11
Likes: 0
I am in the U.S. so I didn't notice the issue of being unable to change to metric until a few months ago when I was driving in Canada. I have been unable to figure out how to beat he fact that it always goes back to English after trying to set it to metric
Member
Joined: Aug 2009
Posts: 74
Likes: 0
From: Boston
Check out my origianl thread of my Pioneer Z110BT.
https://www.f150online.com/forums/mu...lariat-xm.html
https://www.f150online.com/forums/mu...lariat-xm.html
Junior Member
Joined: Apr 2011
Posts: 3
Likes: 0
Units
I contacted PAC-Audio people and they actually called me a few times telling me that the issue of the unit system was forwarded to Engineering and they will try to figure whats happening, they dont know how long it will take.
Lets hope they come up with a solution.
Lets hope they come up with a solution.
Junior Member
Joined: Apr 2012
Posts: 4
Likes: 0
Hello everyone!
Im new here, I just installed in my truck a Pioneer AVIC-X930BT, i modified and used the OEM bezel and I used the PAC MS-FRD1 and everything works fine but......... After the installation i saw that my truck changed the units system to English (now i have miles and Fharenheit) here in canada we use KM and C.
When I go into the options in the dashboard and When i select to go back to metric system it goes back to Miles and stuff by itself. I disconnected the ms-frd1 and it worked (I was able to go back to metric system) but as soon as i connected the ms-frd1 again it went back to miles again :S.
Does this happened to any of you guys??? is there anything I can do to fix this?
Here is the link of a picture after the installation.
https://www.f150online.com/forums/me...adio-bezel.jpg
Hope someone can help me out with this.
Thanks.
Fernando.
Im new here, I just installed in my truck a Pioneer AVIC-X930BT, i modified and used the OEM bezel and I used the PAC MS-FRD1 and everything works fine but......... After the installation i saw that my truck changed the units system to English (now i have miles and Fharenheit) here in canada we use KM and C.
When I go into the options in the dashboard and When i select to go back to metric system it goes back to Miles and stuff by itself. I disconnected the ms-frd1 and it worked (I was able to go back to metric system) but as soon as i connected the ms-frd1 again it went back to miles again :S.
Does this happened to any of you guys??? is there anything I can do to fix this?
Here is the link of a picture after the installation.
https://www.f150online.com/forums/me...adio-bezel.jpg
Hope someone can help me out with this.
Thanks.
Fernando.
Junior Member
Joined: Dec 2012
Posts: 1
Likes: 0
I came across this thread and thought I would share my "truckputer" install of my 2011 F-150 Lariat SCREW. I am a new member so I cannot post pictures. I have a link to another forum where I posted my story and you can see the pictures there. I kept the wood grain and installed a touch screen that looks very factory. Check it out and let me know what you think.
http://www.mp3car.com/newbie/150287-...ruckputer.html
http://www.mp3car.com/newbie/150287-...ruckputer.html