Don't know if you guys worked this out yet, but here's my experience. I put an AS 1.5 leveling kit on my 04 screw. The part actually measures 1.25 and it lifted the truck 2.5. So be careful what you get. I ended up ordering the 1" urethane kit from daystar and will cut it to 3/4" to get the 1.5 since whatever the actual size of the shim is will double the lift it says it will provide.

 

very true.... the daystar kit actually measures, if i remember right, about 1.375 inches. I thought too, of milling the urethane down, but then you would have to cut the stud extenders- and the studs on the factory assembly- down too and the perfect height wasn't quite that important to me. I actually like how it sits now quite well.

 

^^^^^^

Wish one of you two would post some pics here of your 1" daystar kit trucks!

 

The 1.5" kit gave you 2.5"'s?!?! Did you have it aligned? Doesn't sound right man...

 

I have the daystar 2.5 kit on my 06 f150 screw lariat. The front definitely sits higher than the rear, which made me order a 3 inch block for the rear, which i still have to install.



but from the right angle it looks level: