Low Profile 22s, Super Duty style.....
Thread Starter
|
Senior Member
Joined: May 2001
Posts: 2,651
Likes: 0
From: Albany, GA
Low Profile 22s, Super Duty style.....
I sold the 37in Nittos on 22x10 Rockstars I had...then bought these. They are 335/55/22 BFG Mud Terrains (limited editions) on 22x11 Motometals. They come out to about a 36.5" tall. I honestly didnt realize they were this big when I bought them. I guess I am going to have to go with a 5in lift to clear them....either that or just sell them too.
Suspended
Joined: Nov 2007
Posts: 701
Likes: 0
From: Navasota, Tx
wow those are some big tires. you may need to do a bit of suspension mods to be able to drive. you might be able to drive straight on smooth roads with no body in the truck on the moon. but other then that...
Thread Starter
|
Senior Member
Joined: May 2001
Posts: 2,651
Likes: 0
From: Albany, GA
Originally Posted by squirtbottle09
you may need to do a bit of suspension mods to be able to drive.
I had planned to just do a DR 2.5in kit, but that just wont cut it. So I will have to either go with a 5in Ruff Country or one of the many 6in kits out there. The thing is I dont want to go any higher than I have to since I use the truck for towing my cars to shows.
Last edited by RamSS/T; Feb 24, 2008 at 01:53 AM.
Thread Starter
|
Senior Member
Joined: May 2001
Posts: 2,651
Likes: 0
From: Albany, GA
Originally Posted by LovetheTide
Does Buskwacker make cut-out flares for your year truck?
I think so but they are so God awful ugly to me I would leave it stock before I put them on it. (Nothing against the other people on here running them...they look great on your truck!
)Besides I already have a set of factory Ford HD fender flares to put on it.
Senior Member
Joined: Dec 2006
Posts: 881
Likes: 0
From: Tuscaloosa, AL
I was just thinking that would be an easy and cheaper way of fitting them without having to lift it, or lift it as much.
Trending Topics
Junior Member
Joined: Feb 2008
Posts: 9
Likes: 0
From: Gainesville
Originally Posted by LovetheTide
I was just thinking that would be an easy and cheaper way of fitting them without having to lift it, or lift it as much.
Senior Member
Joined: Oct 2006
Posts: 1,186
Likes: 0
From: Arkansas
Originally Posted by Grubrunner
What makes the BFG's a Limited Edition?
Notice the channels in the middle of my tread.
Last edited by FoMoCoFan17; Feb 24, 2008 at 08:12 AM.
Suspended
Joined: Aug 2007
Posts: 2,234
Likes: 0
From: North of Dallas Tx
Wow, there is another guy with the same pics as you different thread.
What's the deal? Were ya dying to show the rims off? If so, can't say that I blame ya. They look pretty friggin sweet
different thread.What's the deal? Were ya dying to show the rims off? If so, can't say that I blame ya. They look pretty friggin sweet
