Spring is here finally Installed my 35" tires.more pictures in my gallery

 

Nice!! I like that setup alot!!

 

Looks good Are those procomp extreme all terrains?

 

it looks like they are!

 

any rubbing??? Looks really good!!!

 

i gotta ask how is the rubbing? and are those 325/60x18 or 325/65

Looks great by the way

 

There procomp x-treme AT. 325/65/18 maxx 6 rims 18x9 Click on the little black camera shows close ups of front tire turned. I had make some modifications like: shave the inner fender 1 inch and drill into the body support frame and the inner fender and stuck a bolt through the hole of the inner fender and body support frame which that pushed the inner fender back

 

Your tires look a heck of a lot closer to the fender than my 35's with leveling kit and I got some rubbing at near full turn. Driving me batty with the pop pop pop! Can you post some pics of that mod you did?

 

Nice. Looks good bro.

 

I have pictures in my gallery(click on black camera) some close up of the fron tires. On the picture you can see where I shave inner fender a inch and see where i pushed the inner fender in rear corner with a bolt and drilled in the body support frame. I'll be taking more pictures tomorrow if I have time. I'll get some pictures underneath the rear fender.[IMG][/IMG]
[IMG][/IMG]

 

Looks Good! I'd like to see the close up picks of the mod to the fender...

 

I would love to see more pics please....what backspace do those rims have?? and do you guys think i could do this same set up with 315/70/17?

 

thats 34.5x12x17. You might be ok with no mods. Its really hard to say. Mine are 35x13.5x18 tires. I'll get some close ups today and I'll measure my backspacing. When I ordered my tires and rims I told 4x4 shop I need these tires to fit without to much sticking out. I'm not sure if i like these tires because they through rocks because of the aggresive tread. Things I overlooked when i bought these tires. I always here rocks hitting underneath and side of truck. I gringe when they hit the paint.
That bolt you see when close up of the tires is not a stock bolt. I added that bolt to push inner fender back. that bolt mounted to inner body mount support

 

Looks nice! I was wondering if you could get me a couple of measurements? From the ground to the bottom of the fender flare both front and rear, and also from the top of the tire to the flare both front and rear.

 

I'll get the information tomorrow. My girlfriend had to take my truck to work tonight. Her 2nd job asked if she could work tonight. Her sunroof shattered in her car 2 days ago so we are getting estimates done. So now she can't drive it.