Just thought I would share some photos of my project: adding factory fogs to my s-crew. I have already swapped the switch out, bought fogs on ebay, i just need to finish wiring it up. I am waiting for some mounting hardware to come in for the fog lights and a pigtail kit. I also ordered a Mark-LT tailgate handle to try it out. I will post pics of that when I get it in. I will be adding the rest of the handles in the near future.

 

Looks better My truck is getting a slight makeover too.

 

Maybe it's an illusion or a result of removing your bumper, but it looks like you're sporting some positive camber in your photos. Bumper looks great!

 

I want to do this upgrade as well, can you tell me where you got the bumper from plus all the other accesseries. Is it straight forward. Your truck looks great.

 

I got my bumper and headlamp switch from www.getfordparts.com These people have been awesome helping me out. I deal with a guy named Domenic. I see you have a 2005, the bumpers with the round fogs only fit 2006+ they changed the mounting hardware after 2005. I'm sure he'll find you a 2005 one though. To make a long story short, my truck was factory wired from the headlamp switch connector to the junction box in the pass side kick panel. The switch was just a plug-n-play. The bumper also just bolted right on. I got fogs on ebay and am waiting for some wiring pins to finish it up. I only have to run the wires from my j-box to the fogs. I have done extensive research on this subject so any help let me know.

 

That is just an illusion...however I do need the alignment done, I just put my AS 2.5 back on recently. Check my gallery, my AS 2.5" survived a bad crash which totaled my 2005 truck!

 

Damn sure glad you were able to walk away from that one and the bumper looks like it's at home where it should be

 

Can you pass along a quick overview about removing the front bumper, what bolts need to be removed, my bumper has become chipped up and need a new coat of paint.

Thanks

 

sick i want to do that but painted bumper. looks really good man!

 

Remove 3 bolts for each fog light housing
Remove 3 plastic push pin connectors holding rubber splash gaurd to bumper
OPTIONAL(can be done after) Remove 13 screws holding the lower valance on
Remove 8 bolts that hold the bumper on(four on each frame mount)