Leather done, Thanks ChrisAdams
#1
Leather done, Thanks ChrisAdams
The leather in my Scab is finally done and a big thanks goes to Chrisadams for the write up he had on doing the swap. All I have to do now is let the sun heat them up a little to get them tight. Here are the completed pics:
I also need to thank Goslow for the write up on the 20 section!
I also need to thank Goslow for the write up on the 20 section!
Last edited by donniep3; 03-13-2006 at 12:35 PM.
#7
these look fantastic, the colors on this two tone are perfect! my interior colors are the same where can i get these? seat setup is different though as i have the crew cab, there is no rear armrest and the seatbelts on not on the front seats. can you post a link to where u purchased these?
Trending Topics
#8
Originally Posted by 05RedFX4
donniep3
do you have a link to Chris Adams write-up on the leather install?
do you have a link to Chris Adams write-up on the leather install?
Chris had to remove the front seats. I left mine in the truck and just removed the seat bottoms. If you leave them in remove the bottoms first it gives you more room. I learned that the hard way.
https://www.f150online.com/forums/sh...d.php?t=205199
http://whttps://www.f150online.com/f...her+local+shop
https://www.f150online.com/forums/sh...ght=destroying
#9
Originally Posted by westofhwy5
these look fantastic, the colors on this two tone are perfect! my interior colors are the same where can i get these? seat setup is different though as i have the crew cab, there is no rear armrest and the seatbelts on not on the front seats. can you post a link to where u purchased these?
I purchased mine off of ebay. I was planning on buying a set like this from katskinz for around $750. They have many different styles that you can get. There are others that deal with these leathers.
http://leatherseats.com/
Ernster, I didn't get a pic of it done because that was the only thing I broke was the soft piece around the cupholder. I can post one tommorrow. It still looks great!
Last edited by donniep3; 03-13-2006 at 06:38 PM.
#12
#13