Badge and Ford oval removal, how to ?
Senior Member
Joined: Jul 2006
Posts: 1,593
Likes: 0
Originally Posted by welfare wagon
I used a plastic drywall spreader 2 inch wide from Lowes less then a buck, taped off around the emblems, but in your case its not needed and just pushed the spreader under the emblem and once I got 1/3 thru it I could pull the emblem off by hand, this also applies for the F-150 badge too.
I think its highway robbery that they are charging to remove the emblems before painting, I worked in a bodyshop for 2 years and that was part of the prep job before painting just as is sanding, taping etc, I woud get a second opinion even if you take them off yourself, it makes me doubt the quality you would recieve.
I think its highway robbery that they are charging to remove the emblems before painting, I worked in a bodyshop for 2 years and that was part of the prep job before painting just as is sanding, taping etc, I woud get a second opinion even if you take them off yourself, it makes me doubt the quality you would recieve.
Member
Joined: Oct 2006
Posts: 46
Likes: 0
From: Sioux Falls SD
I know there are aligment holes behind those.On my 05,the painted part of the F-150 emblem is flaking off.I pulled the emblem off the drivers side to replace it with one just like on the tailgate(just says F-150 instead of F-150 5.4 Triton)Just heat it up good and pry,then use WD-40 to remove the goo.
