Folding mirrors

Reply Subscribe

Thread Tools

Search this Thread

Dec 16, 2004 | 10:25 PM

#31

dzervit

Senior Member

Joined: Apr 2004

Posts: 4,424

Likes: 0

From: Motor City

Quote:

Originally posted by yob2kanobe
Big D, youve got mail

Alright.... I've gotten a ton of mail and nuttin' from you. Can you resend?

Dec 16, 2004 | 10:45 PM

#32

yob2kanobe

Senior Member

Joined: Aug 2004

Posts: 487

Likes: 0

From: Washington State

Quote:

Originally posted by dzervit
Alright.... I've gotten a ton of mail and nuttin' from you. Can you resend?

Done

Dec 17, 2004 | 02:03 PM

#33

baja150

Senior Member

Joined: May 2004

Posts: 1,271

Likes: 0

Quote:

Originally posted by Sandog53
Guys, you dont need the module. I checked one out today. All the module consists of is some on board relays. You can buy a relay and make this work. All you need to do is pulse a grd when you hit the switch and the mirror will fold. It is alot easier than you are making it out to be. The five wires can be used on a std relay.

Yes the PFMM does consist of 2 relays, but also a limit sensor. If you don't have the limit sensor you have to manually stop the mirrors when they fold all the way in or out. With the limit switch they will stop by themselves so the motors don't continue to run after the mirrors are at the end of their travel.

Dec 17, 2004 | 02:06 PM

#34

baja150

Senior Member

Joined: May 2004

Posts: 1,271

Likes: 0

Quote:

Question- you said "the PFMM is behind the rear seat on the drivers side near the corner" Can you be more specific? Is this behind a panel? Thanks

You have to remove the seatback and c-pillar trim on the drivers side. It's a little higher and rearward of the seat belt retractor.

If you don't have a King Ranch then I'd put the module somewhere else under the instrument panel.

Last edited by baja150; Dec 17, 2004 at 02:09 PM.