Not getting power

Reply Subscribe

Thread Tools

Search this Thread

Oct 31, 2015 | 03:32 PM

Kim1223

Thread Starter

Junior Member

Joined: Oct 2015

Posts: 1

Likes: 0

Not getting power

I have a 2000 ford f-250 with a 5.4, Its rolling over but not starting, I have no power to the cranksensor, cam sensors or coils, fuel pump also not working. Any Ideas?

Oct 31, 2015 | 05:21 PM

Bluegrass

Senior Member

Joined: Jul 2004

Posts: 6,200

Likes: 39

From: Easton, Pa.

You have a power failure to the PCM.
Check the PCM Relay seating, the Relay and the fuse feeding it.
Good luck.

Nov 1, 2015 | 02:24 PM

ManualF150

Technical Article Contributor

Joined: Jan 2007

Posts: 10,636

Likes: 264

From: Vernon, NY

Did you check to see if the fuel cut off switch has been activated?

Nov 1, 2015 | 06:30 PM

projectSHO89

Senior Member

Joined: Oct 2002

Posts: 7,295

Likes: 125

From: St. Louis (Out in the woods)

Quote:

Originally Posted by ManualF150

Did you check to see if the fuel cut off switch has been activated?

The inertia switch cannot prevent power from getting to the coils. Look upstream as Bluegrass recommended.

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last