No heat blow cold air
Thread Starter
|
Senior Member
Joined: Jun 2009
Posts: 128
Likes: 0
From: manalapan,nj
No heat blow cold air
2003 king ranch no heat just had the dealer change the intake manifold gasket now I have no heat what could it be. Air in the line needs bleeding not sure
Senior Member
Joined: Oct 2002
Posts: 7,295
Likes: 125
From: St. Louis (Out in the woods)
Go check the two hoses for the heater core. Set the temp control to hot and turn the blower on HIGH.
If they are both HOT, the problem is in the dash (actuator, ****, blend door, etc).
If one is much hotter than the other or both are cool, the problem is either under the hood or in the heater core itself.
Unlikely.
If they are both HOT, the problem is in the dash (actuator, ****, blend door, etc).
If one is much hotter than the other or both are cool, the problem is either under the hood or in the heater core itself.
Temp gauge inside the truck show 1/2 mark could the thermostat be stuck
