True Blue's progress thread
True Blue's progress thread

I am always reading progress threads on this forum and i absolutly love them so i figured i would start one of my own. From being on this forum for a month or two now i have made a lot of progress and really wanted to get some feed back from what you all think. Thanks for looking i am posting some before and now pics.

day I bought it last year 2002 2wd 4.6 67000 original miles


cold air intake

head unit installed



Definately a clean truck, good job so far!
I would suggest stripping off the side door moldings and doing something with the front bumper...either putting a customer bumper/valance or PTM the black plastic parts
Would make a nice street truck if you decided to go that route. I like the progress threads too, been meaning to make one of my own but haven't spent the time
I would suggest stripping off the side door moldings and doing something with the front bumper...either putting a customer bumper/valance or PTM the black plastic parts
Would make a nice street truck if you decided to go that route. I like the progress threads too, been meaning to make one of my own but haven't spent the time
the 08 emblems are installed almost done removing the pinstriping and the predator programmer is updated and in use. One of the best mods so far I love the programmer such a nite and day difference. I will post pics of the new emblems tomorrow. Oh and the spring tech 6.5" lift arrived a couple of days ago
i have gotten so much accomplished this summer but wife says I need to wait till spring for the 35's so i am going to wait to install and start striping and painting the under carrige and save up for bilstines and make the brackets for my home made dual steering stablizer. deff going to ptm the mirror caps and thinking about the door moldings. also thinking about a billet inset for the bumper.
i have gotten so much accomplished this summer but wife says I need to wait till spring for the 35's so i am going to wait to install and start striping and painting the under carrige and save up for bilstines and make the brackets for my home made dual steering stablizer. deff going to ptm the mirror caps and thinking about the door moldings. also thinking about a billet inset for the bumper.
Trending Topics
Aftermarket-yes it is a double din there was alot of cutting required but I thought it fit nicley I also bypassed the parking break safety with a 5 pole relay so my daughter can watch from her car seat while I drive.
Alex-nope that's totally stock no suspensions mods till I install the lift this spring.
Alex-nope that's totally stock no suspensions mods till I install the lift this spring.






