Raptor's 99+ Front End Swap
oh, you'll get to see plenty 
I took ~35 pics for you to play with. New siggy tiem 
I took ~35 pics for you to play with. New siggy tiem
okay, I finally got a day off and put my lazyness off to the side. My fogs have been sitting for over 3 weeks now and today I got around to installing them
I am officially ending my front end project now. Enjoy:
Who needs Ford's mounting hardware when you have Lowe's?
Nylon locking nuts to hold the lights to the brackets.
1/2" bolts on the ends, and a 3/4" bolt in the middle, all double-nutted for locking security.
They mounted perfectly
Its going to be a while before I can get HIDs for them :/
After cleaning the Jacksonville bugs off
Aimed all the way down.
And all the way up. I should've turned on the HIDs for this, but the headlights sit right above the foglights cutoff line for a beautiful (but mismatched color) on the road at night.
Fin.
I am officially ending my front end project now. Enjoy:
Who needs Ford's mounting hardware when you have Lowe's?
Nylon locking nuts to hold the lights to the brackets.
1/2" bolts on the ends, and a 3/4" bolt in the middle, all double-nutted for locking security.
They mounted perfectly
Its going to be a while before I can get HIDs for them :/
After cleaning the Jacksonville bugs off
Aimed all the way down.
And all the way up. I should've turned on the HIDs for this, but the headlights sit right above the foglights cutoff line for a beautiful (but mismatched color) on the road at night.
Fin.
Senior Member
Joined: Dec 2009
Posts: 2,121
Likes: 1
I didn't know you can aim the fogs, I need to reaim my headlights, because they point down at the road and I can only see like 5ft of the road, so if there was anything in the road, I'd see it at the last minute. But, looks good Raptor!