Is there anyone on this forum running an 04+, 4wheel drive f150 with this size tire -305/55r20-? I would like to run this tire with no leveling kit, but if I could use this size with only a leveling kit that would work. I just dont want to lift the truck and moto metal is suggesting a lift be required to purchase this size tire. Please help, I found a killer deal and the package only comes in this size.

BTW: The wheels are 20X10 with a -18mm offset and a 4 3/4 inch backspace.

 

Yeah, I think you will need a leveling kit because of the width and shallow backspacing on those wheels.

 

I second that. You'll need a leveling kit...even then, it's possible that you could get some minor rubbing at full lock.

Good luck!

 

how far are these wheels going to stick out from the stock wheel wells?

 

A 10 inch wide wheel with 4 3/4 inches of backspacing is gonna stick out 3 1/4 inches farther than the OEM wheels.

 

2.5" Ready Lift Leveling kit
305/55/20
20x8.5

Just got them 2 days ago and haven't had a chance to drive the truck since bringing it home from the shop!

https://www.f150online.com/galleries....cfm?gnum=9243

 

So you don't have any rub what so ever with that setup?

 

Not that I've noticed but I haven't driven it much since I had it done!