I was driving down the road and my truck turned off. I had plenty of gas. Changed tanks and still wont start. Replaced the fuel filter and then unhooked the line and turned the engine over and the fuel pump is pumping gas out like it should be. Not sure what to do now.
That's not a lot to go on- it just quit running. You may have an OBDII system in the truck and most parts houses have scanners that will read any codes. They actually put the OBDII system in the 1995 1/2 YM F150. If you have the old OBD system you'll have to find a scanner for it. They're generally pretty cheap on fleabay. But to give you an idea of what's wrong would be a broad guess at best. Check all wiring and all vacuum lines. Look for anything burnt. It could be as simple as a wire came loose. Check the coil wire and plug wires too.