transmission problem I think

Thread Tools
 
Search this Thread
 
  #1  
Old 11-27-2006, 08:26 PM
badass's Avatar
Member
Thread Starter
Join Date: Jul 2006
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Exclamation transmission problem I think

my F150 1997 auto 2wheel drive will engage into drive but only after reving the engine quit a bit same thing for reverse ( installed a body lift dont know if that extender messed up the shifting
 
  #2  
Old 11-27-2006, 09:49 PM
SlammaJamma's Avatar
Senior Member
Join Date: Mar 2005
Location: Louisiana
Posts: 784
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by badass
( installed a body lift dont know if that extender messed up the shifting
It's possible, but lets wait for the experts (a.k.a Adrian) to tell you for sure.
 
  #3  
Old 11-28-2006, 09:27 AM
adrianspeeder's Avatar
Senior Member
Join Date: Dec 2004
Location: Dover AFB DE / Harrisburg PA
Posts: 4,970
Received 17 Likes on 16 Posts
Hey, I ain't no expert, just spend a lot of time reading.

I don't see how a body lift would mess up a '97, but it started right after you did the lift?

Adrianspeeder
 
  #4  
Old 11-28-2006, 09:01 PM
badass's Avatar
Member
Thread Starter
Join Date: Jul 2006
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
yeah just about but I mibht have put I on wrong Im pretty sure I didnt

I used to only happen when going into 1ST gear or drive but now its been happening when going like 50 mph the engine will rev up with no acceleration
 
  #5  
Old 11-28-2006, 09:18 PM
stratus183's Avatar
Member
Join Date: Oct 2004
Location: Attleboro, MA
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by badass
yeah just about but I mibht have put I on wrong Im pretty sure I didnt

I used to only happen when going into 1ST gear or drive but now its been happening when going like 50 mph the engine will rev up with no acceleration
Sounds like its time for a rebuild! I just had the same problem. When I pulled my tranny apart I found the forward clutches were "welded" together and the piston seal was cut in 3 places! It looks like it was pinched during initial assembly and just progressively got worse overtime.

Try removing your trans filter and cutting it open, you'll probably find pieces of friction material from the clutches.
 



Quick Reply: transmission problem I think



All times are GMT -4. The time now is 03:17 PM.