Go Back   F150online Forums > Special Interest > Articles & How-To's
Sign in using an external account
Register Forgot Password?
Register Photos Vin Decoder FAQ Members Search Today's Posts Mark Forums Read Vendor DirectoryGarage

Welcome to F150Online Forums!
Welcome to F150Online.com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the F150Online Forums community today!





Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-02-2009, 08:21 AM
Technical Article Contributor
Garage is empty, add now
 
Join Date: Oct 2007
Location: Western WA
Vehicle: 2007 Ford F150 FX4
Posts: 334
FX4Chick
How-To Change Rotors / Pads 2004 - 2008

Hey guys/gals:
I recently did a 4 wheel rotor replacement and pads replacement on my truck and wrote up a how-to.

I have not seen one of these here, so I thought I would post this. I hope it helps! If you have any questions, let me know......

__________________________________________________ _______________

Complete front and rear rotor and brake pad replacement

-----> 2007 F150 FX4 <-----

Replaced with Brake Performance rotors and Ceramic pads

Tools Needed:

1. 10mm (rear), 13mm (front), and 18mm (front) sockets

2. 1/2" drive (for 18mm socket) and Breaker bar

3. 3 Pound rubber mallet

4. 18" pry bar

5. Steel and brass wire brushes

6. CRC Disc Brake quiet

7. CRC Synthetic Brake & Caliper grease

8. 8" C-Clamp

9. Patience

1. The best way to do a complete and safe job is put the entire truck on jack stands:
Click the image to open in full size.

2. Tires removed and old equipment still on.
Click the image to open in full size.

3. Find the two 18mm outer bolts (attached to the caliper/bracket) and break loose with 1/2" socket and breaker bar. Once the bolts are removed, use pry bar and flat head screw driver to gently pry off the caliper from the brake pad carrier. (This is much easier than trying to remove the entire assembly together).
Click the image to open in full size.

4. Hang the caliper by a wire (do not let it hang by the brake line itself). Once removed, remove the two 13mm bolts (they have rubber boots on them) from the brake pad carrier. Once these are removed, slowly "walk" the carrier off the rotor. Be very carful not to let the two locater clips (springs) pop off while doing this.
Click the image to open in full size.

5. Once caliper and pad carrier are off, rotor should come right off. Clean up hub in preparation for new rotor. (Wire brushes come in handy for this part)
Click the image to open in full size.

6. Ford stock rotors and new rotors
Click the image to open in full size.

7. Ford pads (left) and new ceramic pads (right)
Click the image to open in full size.

8. Place a thin layer of CRC Synthetic Brake & Caliper grease on the hub before installing new rotor. This only need to be done to the front rotors.
Click the image to open in full size.

9. Gently install new rotor and tighten it down with 3 lug nuts in preparation for the reinstall of caliper housing.
Click the image to open in full size.

10. Clean caliper housing with brass brush to remove all brake dust (paint at this time, if you want to). Slowly and evenly (using old brake pad) compress the caliper pistons in. There is no need to remove the master cylinder cap because there is a built in vent.
Click the image to open in full size.

11. Once compressed back, they should be even and flush with the housing.
Click the image to open in full size.

12. At this time, clean the face of them and apply a thin coat of CRC Disc Brake Quiet. Once the new pads are installed in the brake pad carrier, gently slide it in to place, within the caliper.
Click the image to open in full size.
__________________
www.07FX4.com

Reply With Quote
  #2  
Old 10-02-2009, 08:22 AM
Technical Article Contributor
Garage is empty, add now
 
Join Date: Oct 2007
Location: Western WA
Vehicle: 2007 Ford F150 FX4
Posts: 334
FX4Chick
13. Reinstall the caliper (with the brake pad carrier) on the new rotor tightening the 18mm bolts first (to the brackets), then tighten the 13mm brake pad carrier bolts.
Click the image to open in full size.

14. This is the rear brake housing. There are two 10mm bolts the hold the rear caliper in place. Remove those bolts and hang the caliper or set on something so it is not hanging by the brake line. Remove rotor - this CAN BE a real "job". The E-Brake pads were holding the rotor on and I had to use a 3 pound rubber mallet and a couple of good swings to remove the old rotor. Once removed, clean up all the parts with the wire brushes.
Click the image to open in full size.

15. You can see the E-Brake shoes here. See how they are not totally retracted? There is a star wheel at the bottom of the housing for the E-Brakes. Adjust it so the shoes are all the way in, in preparation for the installation of new rotor.
Click the image to open in full size.

16. Replacement of the rear brake pads are pretty simple. Again, slowly compress the single piston back in so it is smooth with the housing, and install the new pads. One of them "snaps" in to the actual middle of the piston (rear brakes are one piston) and the other pad "snaps in to place on the housing.
Click the image to open in full size.

17. Stock Ford Rotor and new rotor. Once you have installed the new pads in to the caliper unit, slide the new rotor in to place. If it does not slide on, check to make sure the E-brake is completely retracted by adjusting the star wheel on the bottom of the housing. Using the 10mm bolts, reinstall the calipers.
Click the image to open in full size.

18. Finished brake job. Before you go ANYWHERE, start truck and pump brakes or you will have NO brakes to start with. Push and release E-Brake a few times so it will "self adjust" itself.
Click the image to open in full size.

Complete job on single webpage: http://www.07fx4.com/urls/brakes
__________________
www.07FX4.com

Reply With Quote
  #3  
Old 10-02-2009, 05:25 PM
Senior Member
2004 Ford F-150
 
Join Date: Sep 2009
Location: Bluffton, SC
Vehicle: 2004 F150 FX4
Posts: 2,178
very informative..Thank You....are those EBC rotors?
Reply With Quote
  #4  
Old 10-02-2009, 06:09 PM
Senior Member
Garage is empty, add now
 
Join Date: Aug 2008
Location: Clemson, SC
Vehicle: 2007 Ford F-150
Posts: 2,038
Baaa thanks!!!

I was tossed up between doing my brake pads and painting my calipers or buying a two-way remote start/alarm system. Just bought the alarm system today, but doing the brake pads is definitely my next mod. Bookmarked.
__________________
Reply With Quote
  #5  
Old 10-02-2009, 09:37 PM
F150online
Administrator
2005 Ford F-150
My Garage
 
Join Date: Jan 2002
Location: The Bluegrass State
Vehicle: 2012 F-150 King Ranch
Posts: 31,155
Killer write up, S! We appreciate your contribution!! Welcome to TAC!

-RP-
Reply With Quote
  #6  
Old 10-02-2009, 10:30 PM
Technical Article Contributor
Garage is empty, add now
 
Join Date: Oct 2007
Location: Western WA
Vehicle: 2007 Ford F150 FX4
Posts: 334
FX4Chick
Quote:
Originally Posted by Rockpick View Post
Killer write up, S! We appreciate your contribution!! Welcome to TAC!

-RP-
Thanks Rockpick I hope it will help someone in their next mod "adventure"!

Quote:
Originally Posted by carolinaboy32 View Post
very informative..Thank You....are those EBC rotors?
Not EBC. These (and the pads) are made by Brake Performance - here in the US Awesome company to work with! Highly recommend them!
__________________
www.07FX4.com

Reply With Quote
  #7  
Old 10-03-2009, 01:40 PM
Member
Garage is empty, add now
 
Join Date: Aug 2007
Location: New England
Vehicle: 2011 F250 6.7
Posts: 97
Thank so much, just logged on to get wheel torque specs because I am in the middle of a complete brake job as well. Great call out on the grease on the front hub behind the rotor, I would have missed that.

Thanks
Tommy
Reply With Quote
  #8  
Old 01-28-2010, 08:29 PM
Senior Member
Garage is empty, add now
 
Join Date: Jul 2008
Location: Chicago
Vehicle: 07 FORD FX4 S/CREW
Posts: 197
great write up and pics...

doin this in the spring
__________________
07 FX4 S/CREW
SC 1815, Volant CAI, Banks si/so, undercover,
Bed Armor, bushwacker extend PTM, Rancho 9000's F/R, 35" BFG'S w/17 chrome gunner 6, tint tails, Rampage led , V-Leds license plate back up lights...black grille emblem, Hella 2020 fog/driving lights
drill/slot rotors, 30% D/P tint, bug guard, Brisk Racing plugs w/MSD cop's

Reply With Quote
  #9  
Old 03-08-2010, 10:36 PM
Member
Garage is empty, add now
 
Join Date: Jan 2010
Location: nj
Vehicle: 2005 lincoln navigator
Posts: 30
I'm looking for brakes for my 05 Navigator now and think these are a decent price and just want to see how they are holding up and how is performance? I feel like the dimples and slots will eat pads up quick.
Reply With Quote
  #10  
Old 06-03-2010, 07:20 PM
Member
Garage is empty, add now
 
Join Date: Sep 2001
Location: Florida
Vehicle: 2007 ford F150
Posts: 46
Very informative, thanks for the help. made life a lot easier doing my speed sensor.
__________________


2007 F150
"Mods"
6"Tuff Country Lift
20" Neeper Vandal wheels wrapped in 33" toyo's
Snug top bed Cover
Fire and ice bar
Reply With Quote
  #11  
Old 07-05-2010, 02:20 PM
Member
Garage is empty, add now
 
Join Date: May 2010
Posts: 56
good write up, FYI, I never used grease and turned out just fine, just saying if you forget not a big deal.
Reply With Quote
  #12  
Old 07-13-2010, 05:29 PM
Member
Garage is empty, add now
 
Join Date: Oct 2009
Location: Alamo
Vehicle: 2007 Ford F150
Posts: 45
^
|
?
Reply With Quote
  #13  
Old 09-07-2011, 07:50 PM
Member
Garage is empty, add now
 
Join Date: Mar 2011
Posts: 18
Great write up and pics. I just did them all today and found that the rear pads were completely shot with the front pads still having about 70% left. I do live in the country, travelling gravel and dirt roads often while pulling trailers, which I suspect helped add to the rear pad wear.
Reply With Quote
  #14  
Old 09-17-2011, 02:42 PM
Member
Garage is empty, add now
 
Join Date: Oct 2010
Location: Boston
Vehicle: 2005 Ford F150
Posts: 59
I installed the Brake Perfomance premium dippled and slotted rotors with standard semi-metallics last weekend and I have had a chattering/humming noise since. The noise gets louder when I go faster and is not there or not noticeable under about 10mph.After searching, the only thing I came up with that made these types of noises is ABS. Any info would be helpful.
Reply With Quote
  #15  
Old 10-07-2011, 08:16 PM
Senior Member
Garage is empty, add now
 
Join Date: Jul 2008
Location: Chicago
Vehicle: 07 FORD FX4 S/CREW
Posts: 197
I will say thanks again for the awesome write up...tool list is soooo great...

Did the fronts last year with about 30k on the clock...easy as pie...
just did the rears today with about 45k...

I highly suggest before you stat the rears make sure your arm is rested and you have a mini sledge hammer...I must have hit the rotors a hundred times each to get them off...
The rotors laughed at rubber mallet...

no idea why your brakes are making noise...
no roblems ever on front and after 10 miles with rears they seem ok too...
__________________
07 FX4 S/CREW
SC 1815, Volant CAI, Banks si/so, undercover,
Bed Armor, bushwacker extend PTM, Rancho 9000's F/R, 35" BFG'S w/17 chrome gunner 6, tint tails, Rampage led , V-Leds license plate back up lights...black grille emblem, Hella 2020 fog/driving lights
drill/slot rotors, 30% D/P tint, bug guard, Brisk Racing plugs w/MSD cop's

Reply With Quote
Old 10-07-2011, 08:16 PM


 
 
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are On
Refbacks are Off


All times are GMT -4. The time now is 05:16 AM.


 
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company
Contact Us Advertising Privacy Statement Terms of Service Jobs Forum Text Archives
Emails & Contact Details

Search Engine Friendly URLs by vBSEO 3.5.2