Torque Specs
#1
Torque Specs
I'd like to start a list of different torque specs for common jobs. If anyone knows, or has a Ford tech manual...post 'em up! You know we'll all eventually need them!
Wheels:
Lugnuts -
Brakes:
Caliper bolts -
Carrier bolts-
Engine:
Oil drain plug -
Spark plugs -
Oil pan -
Suspension :
Spring cup(top) -
Control arm bolts -
Balljoint -
U-bolts(nuts)-
Spring shackle -
Drivetrain:
Diff cover:
Front-
Rear-
Transmission pan -
This is obviously just a basic list, with room for expansion. Only post figures you know are 100% correct, and I'll edit as needed. If this goes well, maybe we can put together an FAQ or a Quick Reference Guide....add this to it and make it a sticky at the top of the page or in the tech section.
Wheels:
Lugnuts -
Brakes:
Caliper bolts -
Carrier bolts-
Engine:
Oil drain plug -
Spark plugs -
Oil pan -
Suspension :
Spring cup(top) -
Control arm bolts -
Balljoint -
U-bolts(nuts)-
Spring shackle -
Drivetrain:
Diff cover:
Front-
Rear-
Transmission pan -
This is obviously just a basic list, with room for expansion. Only post figures you know are 100% correct, and I'll edit as needed. If this goes well, maybe we can put together an FAQ or a Quick Reference Guide....add this to it and make it a sticky at the top of the page or in the tech section.
#3
The following users liked this post:
#4
Brake caliper anchor plate bolts: 185 nm 136 lb-ft
Brake caliper bleeder screw: 20nm 177 lb-in
Brake caliper flow bolt: 40 nm 30 lb-ft
Brake caliper guide pin bolt: 74 nm 55 lb-ft
Brake disc shield bolts: 18nm 159 lb-ft
Brake flexible hose to frame bracket bolt: 17 nm 150 lb-in
Brake flexible hose bracket to spindle: 30 nm 22 ft-lb
Brake tube fitting: 17 nm 150 lb-in
Brake caliper bleeder screw: 20nm 177 lb-in
Brake caliper flow bolt: 40 nm 30 lb-ft
Brake caliper guide pin bolt: 74 nm 55 lb-ft
Brake disc shield bolts: 18nm 159 lb-ft
Brake flexible hose to frame bracket bolt: 17 nm 150 lb-in
Brake flexible hose bracket to spindle: 30 nm 22 ft-lb
Brake tube fitting: 17 nm 150 lb-in
#5
Oil pan
Tighten the bolts in the sequence shown in 3 stages.
- Stage 1: Tighten to 2 Nm (18 lb-in)
- Stage 2: Tighten to 20 Nm (177 lb-in)
- Stage 3: Tighten an additional 60 degrees
Ignition coil: 6 nm 53 lb-in
Spark plug: 12nm 106 lb-in
Spark plug gap: 1.05 +/- .05 mm
Engine oil drain plug: 23 nm 17 lb-ft
Tighten the bolts in the sequence shown in 3 stages.
- Stage 1: Tighten to 2 Nm (18 lb-in)
- Stage 2: Tighten to 20 Nm (177 lb-in)
- Stage 3: Tighten an additional 60 degrees
Ignition coil: 6 nm 53 lb-in
Spark plug: 12nm 106 lb-in
Spark plug gap: 1.05 +/- .05 mm
Engine oil drain plug: 23 nm 17 lb-ft
#7
Trending Topics
#13
both bolts on the shackle 148 ft-lbs
13. Tighten the U-bolt nuts in 4 stages.
o Stage 1: Tighten in a cross pattern to 35 Nm (26 lb-ft).
o Stage 2: Tighten in a cross pattern to 70 Nm (52 lb-ft).
o Stage 3: Tighten in a cross pattern to 100 Nm (74 lb-ft).
o Stage 4: Tighten in a cross pattern to 133 Nm (98 lb-ft).
13. Tighten the U-bolt nuts in 4 stages.
o Stage 1: Tighten in a cross pattern to 35 Nm (26 lb-ft).
o Stage 2: Tighten in a cross pattern to 70 Nm (52 lb-ft).
o Stage 3: Tighten in a cross pattern to 100 Nm (74 lb-ft).
o Stage 4: Tighten in a cross pattern to 133 Nm (98 lb-ft).
#14
both bolts on the shackle 148 ft-lbs
13. Tighten the U-bolt nuts in 4 stages.
o Stage 1: Tighten in a cross pattern to 35 Nm (26 lb-ft).
o Stage 2: Tighten in a cross pattern to 70 Nm (52 lb-ft).
o Stage 3: Tighten in a cross pattern to 100 Nm (74 lb-ft).
o Stage 4: Tighten in a cross pattern to 133 Nm (98 lb-ft).
13. Tighten the U-bolt nuts in 4 stages.
o Stage 1: Tighten in a cross pattern to 35 Nm (26 lb-ft).
o Stage 2: Tighten in a cross pattern to 70 Nm (52 lb-ft).
o Stage 3: Tighten in a cross pattern to 100 Nm (74 lb-ft).
o Stage 4: Tighten in a cross pattern to 133 Nm (98 lb-ft).