Finally lifted my truck, what do you think?
#1
06-27-2014, 02:14 PM
Join Date: Feb 2014
Location: Cedartown, Georgia
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Finally lifted my truck, what do you think?
I pulled the trigger and went with a RC 6" suspension lift with kicker bars, Fuel Full Blown 20x10 with -24 offset and Nitto Terra Grapplers 325-60-R20. Tell me what you think!
Before lift
After lift
Before lift
After lift
Last edited by FX4_ever; 06-27-2014 at 02:32 PM.
#3
06-27-2014, 02:20 PM
Senior Member
#5
06-27-2014, 05:05 PM
Join Date: Feb 2014
Location: Cedartown, Georgia
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
#6
07-04-2014, 12:28 AM
#7
07-04-2014, 10:26 AM
Trending Topics
#10
07-08-2014, 08:56 AM
Senior Member
#11
07-11-2014, 11:07 AM
Join Date: Feb 2014
Location: Cedartown, Georgia
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
I agree NFLD FLARED 281, the wheels were definitely not my first choice. But every wheel I really wanted was either discontinued, or not available in the 6x135 bolt pattern, wasn't available in 20x10, or it didn't have the offset I wanted. I wanted a machined 5 spoke wheel, and I researched for 6 months. My first choice was the SD Series Crank, but it wasn't available in 20x10. I also liked the Diamo 17K, but it has been discontinued. I was very surprised at the lack of aftermarket wheel options for a 2004 F150. It is what it is.
#13
07-11-2014, 02:45 PM
Senior Member
I agree NFLD FLARED 281, the wheels were definitely not my first choice. But every wheel I really wanted was either discontinued, or not available in the 6x135 bolt pattern, wasn't available in 20x10, or it didn't have the offset I wanted. I wanted a machined 5 spoke wheel, and I researched for 6 months. My first choice was the SD Series Crank, but it wasn't available in 20x10. I also liked the Diamo 17K, but it has been discontinued. I was very surprised at the lack of aftermarket wheel options for a 2004 F150. It is what it is.
