If I get the one piece rotor hub assembly is the bearing built in? Or do I need to buy separate bearings?

 

Its already in. Buy they centric hub conversion. Allows you to buy 4x4 rotors and bearings

 

Yes, on the 4x2 it is all one assembly. Don't get the cheapie China made ones, get a good one if you stay with the one piece. As mentioned, you can by the Centric conversion hub and then use the 4x4 rotors.

 

Thanks fellas!

 

Ok, so I changed out my rotors and pads last night and 2 questions....first off I am missing a bolt on my caliper, can buy these at the local auto parts store? secondly my brakes work better however my brake pedal now has resistance at first but if I keep pressure on the pedal it eventually goes to the floor and my mater cyl is still over filled with fluid? could my mas. cyl. be bad? Also before I changed out the parts it went straight to the floor with little resistance...