so i think im getting good year duratrac tires. 315 75 16 tires. then get rims later. im thinking black steel procomp 52. 4" back spacing. is that too much? i only like them cause they are cheap. wheel spacers i can always get too, but should i look for a wheel with a smaller back spacing?

 

Are you wanting the procomps to go with the 16" wheel? If so I am guessing your best bet for the least amount of rubbing would that will still work with the 315 would be this one: http://www.procompusa.com/prodDetail...21&plID=100347

 

I'm not convinced that 35's will fit with those Pro Comps. I'm sure they won't fit with the wheel he chose. At least not without more lift or a sawsall.

 

well i am lifting the rear 3 inches. and i cant decide between the 52 or 152. but i like the 52s more. and i am willing to trim a little bit. and theres a guy on expedition forum that fits 315s with no lift. but its his winter set up.

 

It was the lesser of the evils. Bottom line the truck needs to go up, keep factory wheels, or go with a smaller tire.

 

ill just get a body lift too. either 2 or 3". not too much on this site i saw and ill do it my self. so if i did that then the 315s will fit better?

 

Yes, if you install a 3 inch body lift you will be able to fit a 35x12.50 tire with an 8, 9 or 10 inch wide wheel.

 

okay so for now i should just stick with 285s still i get a body lift. but i want taller tires. i just see what i can get once i get my spacers.