Largest M/T with a 2" leveling kit?

Thread Tools
 
Search this Thread
 
Old Sep 17, 2010 | 01:39 PM
  #1  
Dirk Diggler's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 123
Likes: 0
From: Ft. Lauderdale, Fl.
Largest M/T with a 2" leveling kit?

What is the largest I can go on my 07 4x4 with an AS 2" kit? Based on all the info I have gathered, I can safely go to a 285/65/20 BFG A/T on stock 20's, but is there a 34ish size mud tire that won't rub? Or am I limited cause of the aggressive sides of the m/t's? Anyone have any recommendations for my next mod?
 
Reply
Old Sep 17, 2010 | 02:39 PM
  #2  
mdhawkin's Avatar
Senior Member
Joined: Mar 2008
Posts: 2,463
Likes: 0
From: Charleston, SC
I run Nitto Trail Grapplers in a 295/70/18 on my OEM rims with no rubbing, they make a 295/65/20 which is close, but the OEM 20's are wider than the OEM 18's. I also have a 2.5" leveling kit. I think you could run those and still be good, may have minor rubbing at full lock.
 
Reply
Old Sep 17, 2010 | 05:55 PM
  #3  
Under Dog's Avatar
Senior Member
Joined: Mar 2007
Posts: 125
Likes: 0
From: Portland, OR
I run a 275/65/20 BFG A/T, which is a hair over 34", with no level kit. No rubbing at all. I would think with a level, you could run 35"s no problem.
 
Reply
Old Sep 17, 2010 | 09:17 PM
  #4  
Dirk Diggler's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 123
Likes: 0
From: Ft. Lauderdale, Fl.
Originally Posted by Under Dog
I run a 275/65/20 BFG A/T, which is a hair over 34", with no level kit. No rubbing at all. I would think with a level, you could run 35"s no problem.
Thanks guys. A few people on here run the A/T's, but I was hoping someone with "M/T" experience could chime in on how tall and wide they have gone with the 2" level.
 
Reply
Old Sep 17, 2010 | 09:26 PM
  #5  
Dirk Diggler's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 123
Likes: 0
From: Ft. Lauderdale, Fl.
Originally Posted by mdhawkin
I run Nitto Trail Grapplers in a 295/70/18 on my OEM rims with no rubbing, they make a 295/65/20 which is close, but the OEM 20's are wider than the OEM 18's. I also have a 2.5" leveling kit. I think you could run those and still be good, may have minor rubbing at full lock.
Anybody sporting the trail graps in 295/65/20 with the 2" level?? these are some nice looking tires.
 
Reply
Old Sep 19, 2010 | 10:32 AM
  #6  
Uin2it's Avatar
Senior Member
Joined: Aug 2010
Posts: 812
Likes: 0
From: OH/KY/MO
Originally Posted by Dirk Diggler
Anybody sporting the trail graps in 295/65/20 with the 2" level?? these are some nice looking tires.
That is what I am leaning towards.....still undecided on the wheels but have a few in mind. Trying to keep it 20x9 and +30mm offset. With the Rancho Quicklift I'm guessing it will fit with minor trimming!?
 
Reply
Old Sep 19, 2010 | 11:39 AM
  #7  
DarrenWS6's Avatar
Technical Article Contributor
Truck of the Month
Joined: Mar 2008
Posts: 16,436
Likes: 5
From: Mansfield, P.A.
I want the 295/65/20 Trail Grapps next, might sell my 33" toyos for them, but yeah they should fit. I still have plenty of well room for 1" bigger.

 
Reply




All times are GMT -4. The time now is 06:19 AM.