Can i fit 35x12.50x18 Nitto Mud Grapplers on my 08 FX4 with a 2" leveling kit and stock rims?

 

First of all welcome! You might do a search, I am running a 35 in kumho mt and they were very close to the upper control arm, the mud graps have a real agressive sidewall so I would bet they would rub... Do a search for threads and see what comes up.

 

would they just rub at full turn?

 

I think u r thinkin rubbing on the fenders, Im talking bout the control arm. Just sittin straight I only had like 3/16 in between tire and upper control arm.

 

i tried toyo open countries, same size and they touched the control arm.

 

I have 305 bfg at's right now but i want to go to a MT and bigger if possible

 

I purchased some wheel adapters that bolt up in place of the wheel and then the wheel bolts to the adapter. I got the 1.5 in. Mine now clears the control arm, however I also did some minor trimming on the shroud under front bumper and in tire well. Gave it a good stance. Take a look at my profile

 

how much were your adapters? i just looked at your pics. nice truck.

 

Thanks, they were 200 for all four and shipping. 6x135 to 6x135 ezaccessories.com

 

thanks alot