Hi Guys,

Before someone flames me, this isn't another "what wheel/tire should I buy" thread. I've done the searches and still can't find the answer I'm looking for. I really just need someone to check my math/thinking on my set up.

I have a '98 F150 XLT 2X. It has 255/70/16's on it now on stock rims.

I'm going with the Nitto Terra Grapplers, 265/70/16 on a Cragar Soft 8 wheel, 5X135mm bolt pattern.

My question is this. I have 2 choices of wheel, 16X7 with a 4" backspace, or 16X8 with a 5" backspace. I originally wanted to go with the 8" wide rim, but with a 5" backspace I'm afraid it'll pull it too far into the wells and create rubbing problems.

Am I correct? Any help would be GREATLY appreciated.

Thanks.

 

I think both will fit fine. The 16x7's and 16x8's will both stick out 1/2 inch farther than your OEM wheels.

 

Thanks for the heads up Wan.

Would one be preferable to the other? I'm just worried about rubbing while I'm turning.

 

I'd go with 16x8's in case you decide to run a larger tire in the future.