I'm looking at a 3" level kit front and 1.5" Add-a-Leaf rear with 35x12.5x20's. The wheels will be Moto Metal 951's in 20x9. Truck is a 2008 4X4 Lariat.

 

I would not put a 3" leveling kit on your truck do to the stress on the upper ball joints and the acute angle placed on the CV joints causing premature ware... Stick with a 2" or 2.5" kit only... I have a 2" leveling kit...







34/11.50 R17 Toyo Open Country MTs...

 

Ok...so with the 2.5" kit and a 3" block rear...would I be able to run 20x9 Moto Metal 951's?

 

The MM 951's in 20x9 are 5.71" BS and 18mm Offset and the same with the 18x9's...which one would work or would they both work with the 35x12.5 tire?

 

To fit 35x12.50's you will need an 8 inch wide wheel with 5.5 inches of bs. I don't think they would fit with 9 inch wheels and 5.71 inches of bs without major rubbing. That wheel would look great with 33x12.50's.

 

Would 6.18" of BS fit, or should I go lower on the # of BS?

 

ttt

 

What about a 17x9 with 4.53" of BS with 35x12.5? I'm trying to figure out what fits...HELP!

 

No.

 

Thanks Wandell.