Machine lug holes to accept stock lug nut
Thread Starter
|
Junior Member
Joined: Nov 2008
Posts: 1
Likes: 0
Machine lug holes to accept stock lug nut
I have a 1999 Expedition/F150 wheel with flat lug holes. My 1997 e150 van takes a tapered lug nut. It looks like the stock Expedition/F150 lug nuts won't screw onto my vans studs(so I've been told). Can I have the lug holes on the rim drilled to a taper to accept my stock lugs? Who would be able to do this? Any ideas?
Senior Member
Joined: Oct 2001
Posts: 265
Likes: 0
From: Colorado
Have you tried the wheel on the van yet? I'm pretty sure the bolt pattern isn't even the same. F150/Expy=5x135mm E150=5x5.5"
You need to check that before you spend any money on machining the wheel.
You need to check that before you spend any money on machining the wheel.