Rough Ride Help

Thread Tools
 
Search this Thread
 
Old Oct 9, 2008 | 10:55 PM
  #1  
BigDawg99's Avatar
Thread Starter
|
Senior Member
Joined: Jun 2008
Posts: 207
Likes: 0
From: NB Canada
Rough Ride Help

I just got a set of 285/65R18 BfGoodRich ALL Terrain Tires for my 2004 Ford F150 4x4..Ever since i put on the tires,,the Ride has Gotten Rough..Feel every little bump or Crack on the road..I am running 35 pounds of Air in the tires..Should i run around 32 pounds to make the Truck ride a little Smoother..
 
Reply
Old Oct 9, 2008 | 10:59 PM
  #2  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
Part of the compromise of having tires with a sidewall as strong as the AT KO's is having a stiffer ride. 35 psi is on the low side for daily driving. I wouldn't go any lower.
 
Reply
Old Oct 9, 2008 | 11:41 PM
  #3  
BigDawg99's Avatar
Thread Starter
|
Senior Member
Joined: Jun 2008
Posts: 207
Likes: 0
From: NB Canada
ok thanks for reply..
 
Reply
Old Oct 10, 2008 | 01:48 AM
  #4  
shindo_hikaru's Avatar
Junior Member
Joined: Oct 2008
Posts: 16
Likes: 0
A tire of that size should not be at 35 psi. Recommend tire pressure at 65, also that tire is a E range, 10 ply side wall, heavy duty tire - can handle 3640 lbs @ 80 psi per tire.
 
Reply
Old Oct 10, 2008 | 03:21 AM
  #5  
DanF150's Avatar
Senior Member
Joined: Nov 2007
Posts: 493
Likes: 0
From: New Hampshire
I run my 305's at 45psi.
 
Reply
Old Oct 10, 2008 | 05:17 PM
  #6  
shindo_hikaru's Avatar
Junior Member
Joined: Oct 2008
Posts: 16
Likes: 0
305/65r18/e 3525lb @ 65 PSI, for daily driving a range of 45 to 55 is recommended, depending on your regional location.

285/65R18/e daily driving at 60-75 psi. but recommended 65 for optimial tire life.
 

Last edited by shindo_hikaru; Oct 10, 2008 at 05:20 PM.
Reply
Old Oct 10, 2008 | 06:28 PM
  #7  
kingfish51's Avatar
Senior Member
Joined: Dec 2003
Posts: 6,550
Likes: 2
From: Mount Airy,MD
The 285/65R18 are LR E with a max of 80. 50 psi would be right for an F150 for anything that the truck is rated for. 35 could be dangerous as you are at less than 50% of load capacity. Well below what the axle ratings is for the truck.
Higher than 50 is unnecessary unless you are towing something very heavy and want more side wall support. I have used 50 for LR E tires before and easily got over 40k out of the tires. If you feel you must go lower, do not go lower than 45. A TPMS set up would be set to go off at 46 for those tires, although you would usually find that LR as OE on a heavier truck.

The tire is rated at 3305lbs at 80. At 35, the tire would be rated at no more than 1600 lbs. Your axle rating is about 4000lbs, well above what 2 tires can handle at 35.
 

Last edited by kingfish51; Oct 10, 2008 at 06:32 PM.
Reply
Old Oct 13, 2008 | 03:46 AM
  #8  
shindo_hikaru's Avatar
Junior Member
Joined: Oct 2008
Posts: 16
Likes: 0
285/65r18E is 3640 @80 psi, thread depth at 16/32, 32.7 diameter, 8-10 rim range.
 
Reply
Old Oct 13, 2008 | 07:11 AM
  #9  
kingfish51's Avatar
Senior Member
Joined: Dec 2003
Posts: 6,550
Likes: 2
From: Mount Airy,MD
Originally Posted by shindo_hikaru
285/65r18E is 3640 @80 psi, thread depth at 16/32, 32.7 diameter, 8-10 rim range.
You are correct, I read the line above. Still though at 35, that is well below the axle rating.
 
Reply




All times are GMT -4. The time now is 03:05 PM.