Transformer

Thread Tools
 
Search this Thread
 
Old Jul 14, 2007 | 05:16 PM
  #1  
04bluecrew's Avatar
Thread Starter
|
Member
Joined: Aug 2004
Posts: 68
Likes: 0
From: Michigan
Transformer (Got the new Truck)

Got the new truck on Tuesday...
Got started on all the mods the moment it got home.
See below, truck goes from mild to wild.

Moto Metal 20X9's with Toyo Open Country A/T's 325x60R20 (or 35x13)
Chrome prerunner bar, Hela Lights, Spray in Bed liner, and 3M window tint.

Let me know what you think...
P.S. Thanks Nebraska for the advice!!! I went with Toyo's instead but your info gave me the confidence to go against the advice of the tire shop.

Plane Jane.


To Transformed!


 

Last edited by 04bluecrew; Jul 14, 2007 at 05:27 PM.
Reply
Old Jul 14, 2007 | 05:28 PM
  #2  
Shane1's Avatar
Senior Member
Joined: Dec 2006
Posts: 602
Likes: 0
From: Phoenix, AZ
Nice ride! Did you put a level kit on, any rubbing with the 35s?
 
Reply
Old Jul 14, 2007 | 05:46 PM
  #3  
04bluecrew's Avatar
Thread Starter
|
Member
Joined: Aug 2004
Posts: 68
Likes: 0
From: Michigan
Originally Posted by Shane1
Nice ride! Did you put a level kit on, any rubbing with the 35s?
I did put the 2.5 inch leveling (AS).... it was easy to install...
Rubbing only occured on the very corner of the lower air dam and slight on the inner fender.
Very minimal modifications took me all of about 10min....



 
Reply
Old Jul 14, 2007 | 07:08 PM
  #4  
speedfreak's Avatar
Senior Member
Joined: Dec 2001
Posts: 228
Likes: 0
From: The Republic of Texas
Fun aint it? Your truck looks great! What's next?
 
Reply
Old Jul 14, 2007 | 09:38 PM
  #5  
raptor2's Avatar
Senior Member
Joined: Jun 2007
Posts: 198
Likes: 0
Where did you buy the 956's and how much where the wheels? Also, what offset and backspacing are those. I'm still torn between the 951 and 956.
 
Reply
Old Jul 14, 2007 | 10:30 PM
  #6  
renglander's Avatar
Senior Member
Joined: Oct 2004
Posts: 113
Likes: 0
From: Louisiana
nice transformation. Clean that nice truck! You mst have been itching to put the mods on...
 
Reply
Old Jul 14, 2007 | 10:53 PM
  #7  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
Sweet!!
 
Reply
Old Jul 15, 2007 | 12:22 AM
  #8  
04bluecrew's Avatar
Thread Starter
|
Member
Joined: Aug 2004
Posts: 68
Likes: 0
From: Michigan
Originally Posted by speedfreak
Fun aint it? Your truck looks great! What's next?
Yes....
Intake, Exhaust and Tonneau cover....
 
Reply
Old Jul 15, 2007 | 12:24 AM
  #9  
04bluecrew's Avatar
Thread Starter
|
Member
Joined: Aug 2004
Posts: 68
Likes: 0
From: Michigan
Originally Posted by raptor2
Where did you buy the 956's and how much where the wheels? Also, what offset and backspacing are those. I'm still torn between the 951 and 956.
I got a pretty good package deal from local tire shop in Michigan.
Belle Tire....
They have the 30mm offset... They barely stick out.....Maybe a 1/4 to 1/2 inch.

They ran around $300 a piece (plus tax)....
 

Last edited by 04bluecrew; Jul 15, 2007 at 12:41 AM.
Reply
Old Jul 15, 2007 | 12:27 AM
  #10  
04bluecrew's Avatar
Thread Starter
|
Member
Joined: Aug 2004
Posts: 68
Likes: 0
From: Michigan
Originally Posted by renglander
nice transformation. Clean that nice truck! You mst have been itching to put the mods on...
Yes I was,
Tires, Wheels, Light Bar, Lights were all sitting in Garage waiting for install. The truck was built on June 16 but since it fell close to shutdown for the Dearborn truck plant it got delayed and didn't get shipped until July...

I missed taking it to a local truck play area called the Silver Lake Sand Dunes. Had to take a car and sit and watch friends drive their trucks on the dunes... I was totally bummed...
 
Reply




All times are GMT -4. The time now is 04:27 PM.