TPMS effected when upgrading tires on OEM wheels??

Old Jul 8, 2007 | 11:23 PM
  #1  
aftermarket's Avatar
Thread Starter
|
Senior Member
Joined: Sep 2006
Posts: 427
Likes: 0
From: AB
TPMS effected when upgrading tires on OEM wheels??

I did the search and came up with zip on it.

My new 07 has the 18" XTR chrome clad wheels, and I think I'd keep them and not mess with the TPMS bands. The tires I have are ok, but I'd like to add a levelling kit and new, more agressive tires.

But here's the question.

Will the bands be ok if I JUST swap the rubber for aftermarket ones, such as Toyo MT's (prob 33's)?

The bands shouldn't be messed with if you're ONLY just changing the tire, right?

Should I get the dealer to change the tires rather than the tire shop?
 

Last edited by aftermarket; Jul 8, 2007 at 11:31 PM.
Reply
Old Jul 9, 2007 | 01:32 AM
  #2  
hmfic's Avatar
Senior Member
Joined: Jul 2005
Posts: 1,263
Likes: 0
From: E.C. Wisconsin
I have the TPMS on my KR. The day my truck came in is the day I took off the factory tires and put on 305/65/18 BFG KO's on. I have never had a problem with the sensors. My dealer did the swap for me.
 
Reply
Old Jul 9, 2007 | 07:21 AM
  #3  
kingfish51's Avatar
Senior Member
Joined: Dec 2003
Posts: 6,550
Likes: 2
From: Mount Airy,MD
Your TPMS should be okay. ONly problem you may have is if the tires you take off are load range C and you put a P series tire on that has to run at a lower pressure. If the lower pressure is lower than the low pressure setting for the LR C tires, the TPMS will giv the warning. I believe that can be reset, but may have to be done by Ford.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:06 AM.