i have a 05 screw 4x4 with 2.5 as. Im having trouble deciding. I have searched around and cant tell what looks better, 18" rims with 33's or 20" with 33's. Any one with either setup please tell me if the tire 2 rim ratio looks go or if you regret going one way or the other. It does go offroad alot. I would love to do 20" with 35's but lift laws in mass. prevent it thanks in advance

 

im not sure how wide you want to go but i put on a goodyear wrangler ats 275 65 20 which is a metric 34" tire and nitto terra grapplers have the 65 20 size. and everything still fits w/ the 2.5 as

https://www.f150online.com/galleries/....cfm?num=13593

 

Personally, I'd go with a 325/60-18 (33x13.00) tire on an 18x9 inch wheel with 5 to 6 inches of backspacing (depending on how far you want the tire/wheel to stick out).

 

PHOTOS

What Wandell says, I have! I am STOKED with the look of these tires and rims

 

will i have any rubbing with kmc xd diesel 18x9 5" back spacing with terra grappler 325/60/18 any one have the same wheel size and backspacing

 

If you do, it will be at the rear edge of the front wheelwells where you can do some minor trimming but I doubt you have any.

 

Thats exactly the setup I have! Like wandell said, I had to trim the lower fender flare a little bit, otherwise, it's great!

 

does anybody know what kinda 18" rim would fit on a 35" tires? and what bolt pattern is a 4x2 crew cab? i know there are some rims that are thinner and designed for cars. thanks

 

18x9 wheel for a 35x12.50, if your truck is 04-present, your bolt pattern is 6on 135mm.

 

What backspacing are your rims? Love the look and stance of your truck from the front.

 

18x9 with 5" backspacing....
Thanks for the compliment!