I have just put in an order for a set of 325/60/R18 Goodyear Silent Armor's
They come out to 33 x 13, the wheel I went with was the MM 951, 18x9 with 6.18 BS and +30mm offset.

1) Will they fit with a 2" leveling kit, Clearence/Rubbing?

2) How far will they stick out

According to my calculations I will be sticking out between 1 and 1.5" Please correct me if I am wrong.

 

Right, they should stick out about an inch farther than the OEM wheels. That combo will fit fine, if you have a 4x4.

 

So with the above offset and backspacing on those wheels I will not have any rubbing on suspension components? I am just sitting here trying to figure out how the change in wheel and tire width will effect clearance issues with the suspension. I guess I just dont want to be stuck with rims that dont fit. Please ease my mind.

 

A few members here have similar combo's with no rubbing. The tire will be close to the upper ball joint but it shouldn't touch.

 

Thanks, that area was my main concern as there is not that much room to spare with the stock setup. I am getting anxious, tires are in, but I am waiting for the wheels to get here as they are backordered.


Thanks again
Justin