*NEW* **** Cepek DC-1 Wheels...
#1
*NEW* **** Cepek DC-1 Wheels...
Just wondering if anyone has seen, or heard anything about these wheels. The biggest size they make is a 17x9 for the 6x135 bolt pattern, and I am curious if they will fit on my '04 SCab FX4. Any help would be appreciated. Thanks in advance guys.
Here is the link to all the info...
http://www.****cepek.com/DC1.html
Here is the link to all the info...
http://www.****cepek.com/DC1.html
#2
#3
Wandell... I can always count on you!
I am planning on running roughly a 33x12.50R17. Also, since I am now stepping down to a 17" wheel, I can even go after the 315/70R17's... would that be to much sticking out on the 315's? I do have a front-end leveling kit, so there is a little more clearance then stock, as you all know. I do not mind trimming the wheel wells, if need be. Also, I do hunt, so the tires would not go unused. I just worry about them bottoming out, when I drive over some small logs, forge creeks, etc... what do you think?
I am planning on running roughly a 33x12.50R17. Also, since I am now stepping down to a 17" wheel, I can even go after the 315/70R17's... would that be to much sticking out on the 315's? I do have a front-end leveling kit, so there is a little more clearance then stock, as you all know. I do not mind trimming the wheel wells, if need be. Also, I do hunt, so the tires would not go unused. I just worry about them bottoming out, when I drive over some small logs, forge creeks, etc... what do you think?
Last edited by Night Stalker; 01-08-2006 at 11:01 PM.