Stalling at Idle
Thread Starter
|
Junior Member
Joined: Nov 2019
Posts: 4
Likes: 0
From: Cape Canaveral, Fl.
Stalling at Idle
Going off of a code reader printout for suggestions, Ive replaced the EGR Valve and EGR Sensor. Replaced spark plugs as well due to chugging. Still stalling. It also suggested Oxygen Sensors might be the cause?
Last edited by Dustin Moore; Jan 5, 2020 at 03:53 PM.
Thread Starter
|
Junior Member
Joined: Nov 2019
Posts: 4
Likes: 0
From: Cape Canaveral, Fl.
Well for some reason my signature has not showed up which contains all the information about my vehicle. I applied it again and there it is. 2000 F150 2WD XLT
4.6L V8
The two other suggestions it had were for Bank 1 and 2 Oxygen sensors after the EGR Valve.
4.6L V8
The two other suggestions it had were for Bank 1 and 2 Oxygen sensors after the EGR Valve.
Last edited by Dustin Moore; Jan 5, 2020 at 08:51 PM.
Senior Member
Joined: Dec 2006
Posts: 43,530
Likes: 817
From: Joplin MO
Again, please post the numeric codes. They are 5 digits beginning with the letter "P". "Suggestions" are meaningless without the actual codes.
Stalling at idle often is a sticky idle air controller. Oxygen sensor-related codes are seldom caused by faulty sensors.
Stalling at idle often is a sticky idle air controller. Oxygen sensor-related codes are seldom caused by faulty sensors.