Help!!!!!!!

Thread Tools
 
Search this Thread
 
  #1  
Old 05-11-2016, 10:56 PM
Marc Jenkins's Avatar
Junior Member
Thread Starter
Join Date: May 2016
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Help!!!!!!!

I have a 2002 Lariat F150 V8 Triton 5.4L cylinder 3 missfire blew could pack out but not plug however melted boot and now cannot get enough bite with spark plug socket to remove plug. It's almost like it got sucked down or went crooked anyone else with this? Don't want to take it to a shop have no money need advice
 
  #2  
Old 05-11-2016, 11:00 PM
Bluejay's Avatar
Global Moderator &
Senior Member

Join Date: Mar 2005
Location: Burleson/Athens/Brownsboro, TX
Posts: 26,015
Received 68 Likes on 64 Posts
Take an ice pick or something similar and dig around the plug. Then blow out the debris with air.
 
__________________
Jim
  #3  
Old 05-11-2016, 11:46 PM
Marc Jenkins's Avatar
Junior Member
Thread Starter
Join Date: May 2016
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
I did that and got it all out for some reason

it just won't grab here is a pic might barely be able to see
 
Attached Thumbnails Help!!!!!!!-video0012_-000000001.jpg   Help!!!!!!!-imag0106.jpg   Help!!!!!!!-imag0105.jpg  
  #4  
Old 05-11-2016, 11:47 PM
Marc Jenkins's Avatar
Junior Member
Thread Starter
Join Date: May 2016
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
I think it is cross threaded n crooked. Ford dealer put it in
 
  #5  
Old 05-14-2016, 10:33 AM
DYNOTECH's Avatar
Technical Article Contributor

Join Date: Oct 2006
Location: Michigan
Posts: 1,770
Likes: 0
Received 5 Likes on 5 Posts
Tap the socket down using a small hammer. Looks like it should have enough to grab are you using a six point socket? If the dealer installed it the I would take it back with the receipt and have tell them to remove it no charge.
 



Quick Reply: Help!!!!!!!



All times are GMT -4. The time now is 08:29 PM.