I have been looking for performance pulleys for my 97 4.6 F150, and efverywhere i look i see them for around $200, and that seems like totally too much...well i found a set in Jegs for a 4.6 mustang GT for around 100 bucks.... my question is...will they fit my truck? if anything i just want the crank pulley and the alternator pulley to fit....so guys lemme know what the verdict is....
also, in jegs i saw the ram air system from march performance for 5.0's and 96-97 4.6 GT's.... i'm not exactly sure what all in included in the system but what i am thinking is that i could put it on my truck...would the shroud from the ram air system fit around my K&N FIPK filter? i'm just thinking it would be pretty slick to run the ram air down to my air dam and cut a hole down there for the air to come through.... thanks for the help in advance

 

I am not sure on the pulleys but I am willing to bet that they would not fit considering we different size crank and alt.

If you want a Ram air setup you can use what the L's are using from Johnny Lightning . Its basicaly the same accept that it is for F150's not mustangs.

 

thanks for the info, i have been looking for the johny lightning ram air all morning but no luck so far...do you know where i can get a look at it, maybe order it? do they have a website?

 

Try looking on ebay and also do a search in the lightning Forum.

 

There is a Shaker hood ram-air setup that is just about to be released from Proglass. It's a little on the pricey side,but looks cool and is a cold air(ram-air?) setup.,,,,98 http://www.profinish-proglass.com