trouble codes P0133 and p1260 on f150

Thread Tools
 
Search this Thread
 
Old Jul 19, 2008 | 06:07 PM
  #1  
tbowman053's Avatar
Thread Starter
|
Senior Member
Joined: May 2008
Posts: 304
Likes: 0
From: maryland
trouble codes P0133 and p1260 on f150

i have a 2000 f150 4x4 5.4 and got these code what do they mean the 1260 means theft detected engine disabled but it starts but when i use my auto start sometime it wont start sometimes it will please help i dont know what p0133 means please help
 
Reply
Old Jul 19, 2008 | 06:15 PM
  #2  
torkum's Avatar
Senior Member
Joined: Dec 2005
Posts: 2,426
Likes: 2
From: Lebanon,TN
On the P0133 I would first check the wiring and the connector to the O2 sensor up front on the passenger side. If the wiring is ok you probably need a new O2 sensor up front on the passenger side.
As for the P1260 I would say the remote start has tripped something in the PATS system. Guess I would go to the installer for help on that one.
 
Reply
Old Jul 19, 2008 | 08:55 PM
  #3  
tbowman053's Avatar
Thread Starter
|
Senior Member
Joined: May 2008
Posts: 304
Likes: 0
From: maryland
well the auto start was on the truck when i got it a year ago and has worked fine but everytime it wont start. my a/c is on i figured the a/c compressor was just putting it under a load ya know. also it just crossed 100,000 miles so o2 sensor not a suprise but i just got my oil changed today i wonder if the dealship could have done something
 
Reply
Old Jul 19, 2008 | 09:24 PM
  #4  
tbowman053's Avatar
Thread Starter
|
Senior Member
Joined: May 2008
Posts: 304
Likes: 0
From: maryland
can someone please tell me how to get the theft code out of my truck i deleted it with my edge but the theft light in my truck just blinks and blinks and blinks could un hooking the battery do the trick i doubt someone tried to steel it and if they did if insured lol. i just want it to stop thinking its stolen
 
Reply
Old Jul 20, 2008 | 12:52 PM
  #5  
FordTech1's Avatar
Senior Member
Joined: Jan 2008
Posts: 250
Likes: 0
From: PA
A slow steady blink is normal....every few seconds or so....
 
Reply




All times are GMT -4. The time now is 04:37 PM.