Changing C.O.P'S

Thread Tools
 
Search this Thread
 
Old Jan 14, 2008 | 10:56 PM
  #1  
jonamond's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2007
Posts: 287
Likes: 1
From: Milton, Ontario, Canada
Changing C.O.P'S

i am convinced that my coils need changing. i dont ever wanna touch the plugs(to scared )

but i tried to take the #4 cop of just to see how its holding up but it wont freaking budge. #5 came of fine but #4 i was pulling for 20 min and then the coil came right out of the boot. i tried channel locks for more grip but nothing.

Any advice would be very helpful

Thanks
 
Reply
Old Jan 15, 2008 | 03:07 PM
  #2  
Nolo's Avatar
Member
Joined: Nov 2007
Posts: 80
Likes: 0
From: Flowood
Have you tried long needle nose pliers?
 
Reply
Old Jan 15, 2008 | 03:08 PM
  #3  
Nolo's Avatar
Member
Joined: Nov 2007
Posts: 80
Likes: 0
From: Flowood
And don't put that boot back in. Get a new one, some dielectric grease, and then install it.
 
Reply
Old Jan 15, 2008 | 03:26 PM
  #4  
jonamond's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2007
Posts: 287
Likes: 1
From: Milton, Ontario, Canada
i tried a lot of tools but i could budge the boot
 
Reply
Old Jan 15, 2008 | 03:28 PM
  #5  
Kevin Everhart's Avatar
Junior Member
Joined: Apr 2007
Posts: 12
Likes: 0
From: Winston Salem NC
I use my 3/8 extension just push it in boot far as you can usually will come right out if you hold your mouth right.
 
Reply
Old Jan 15, 2008 | 03:32 PM
  #6  
jonamond's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2007
Posts: 287
Likes: 1
From: Milton, Ontario, Canada
Originally Posted by Kevin Everhart
I use my 3/8 extension just push it in boot far as you can usually will come right out if you hold your mouth right.
good idea
 
Reply




All times are GMT -4. The time now is 02:11 PM.