I installed a 6" Fabtech lift wth 35" tires when I first excelrate i get a slight vibration mostly a noise in the steering column for a few seconds then its gone...anyone else have this happen.

 

What brand of tires and wheels did you get?

 

I first noticed it when i had the 35x13.5x20 xterrains I still get it with the 35x10x17 bfg all terriansi thaught it might have been the knobbier tires but its still doing it maybe a main bearing

 

Possible wheel bearing. Jack the wheel up and have someone shake the wheel while you watch from the back side. Look for excessive movement like the brake rotor moving with the wheel. Also watch the ball joints and tierods.

 

I had to replace my passenger side wheel bearing it was loose and tie rods they were bad too ...I just put a fabtech on too feels fine now ...you can feel the tires when you first start off because they are big tread.....

 

thanks Ill give it a try..

 

This may help you narrow it down.

 

Hello, I was wandering where you got the 35X10X17s I cannot seem to find them anywhere and I dont want to have to buy new rims. Thanks alot!

 

Try looking for the 315/70r17 those are the same tires thats the way they measure them good luck.